Labeling Speed/Rate: 1400 linear inches of web per minute standard
Drive System: Heavy duty 1/8 hp DC drive motor
Label Placement: Label placement up to +/- 1/32” when labels are produced to specifications and product handling is controlled
Electrical: 115 VAC/60Hz – 6 amps
Label Roll Capacity: 12” maximum outside diameter wound on a 3” I.D. core. Die-cut waste removed with minimum of 1/8” separations between labels in running direction
Air Requirements: 80 psi/3 cfm when equipped with tamp, flag, blow, swing, or corner wrap
Label Size: Minimum 1/2” wide x 1/2” long, Maximum 61/2” wide x 12” long (optional sizes available)
Environment: Operating 50-95° F (10-35° C), 15-85% RH, non-condensing
General Size: 25”W x 22”D x 21”H
Weight: 60 lbs. with u-arm
Product Sensors: Photoelectric or dry contact (mechanical limit switch)