Semi-Automatic Print & Apply

A semi-automatic table top label applicator that is the ideal system for hand pack stations or short production runs. It features fast, easy changeover to meet a variety of labeling needs.

LM1012LL

Table-Top Semi-Automatic Label Applicator

Most all LM1012 module configurations available to loose loop print and apply a label with a compatible printer model.

Request a Quote

Additional Modules

Works with:

The LM1012LL is a semi-automatic, table-top print-and-apply system ideal for hand-pack stations and short production runs, offering fast and easy changeover between modules. Equipped with a loose-loop interface for compatible thermal or inkjet printers, it supports round, tamp, flag, and dual-cartridge modules to adapt to jars, bottles, tubes, and flat containers. It applies labels at a rate of 10–30 per minute with high precision (±1/32″), while accommodating label rolls up to 12″ in diameter. Built for reliability, the system runs on 100–240 VAC power and weighs approximately 40 lbs (plus module weight), making it a compact yet robust solution.

Benefits:

This semi automatic label applicator delivers big efficiency gains by automating short-run, hand-pack labeling, reducing manual labor and speeding up production. Its modular design allows rapid changeover between tamp, round, flag, and dual-cartridge modules, so you can easily adapt to a wide range of container shapes. Plus, with compatibility for color or thermal printers, it ensures each label looks clean, consistent, and professional.

Labeling Speed/Rate: 10-30 per Minute
Label Placement: Label placement up to +/- 1/32” when labels are produced to specifications and product handling is controlled
Electrical: 100-240 VAC/60Hz – 5 amps
Label Roll Capacity: 12” maximum outside diameter wound on a 3” I.D. core. Die-cut waste removed with minimum of 1/8” separations between labels in running direction
Air Requirements: 80 psi/3cfm when equipped with tamp, flag, or round module
Label Size Minimum: 1/2” wide x 1/2” long Maximum 6.5” wide x 14” long (optional sizes available)
Environment Operating: 50-95° F (10-35° C) 15-85% RH, non-condensing
General Size: 20”W x 26”D x 24”H
Weight: 40 lbs. plus weight of modules (5-7 lbs. each)

Low to mid volume product applications
Hand Packaging stations
Add printing capabilities with a printer interface cable to loose loop print and apply labels from a compatible desktop model.

Most LM1012 module configurations are available to loose loop print and apply a label with a compatible printer model.

Industries:

Automotive
Bottling
Cannabis
Chemical
Food and Beverage
Manufacturing
Pharmaceutical
Health and Beauty

System Status Light Tower
Loose Loop Interface to Thermal Printer or Color Ink-Jet
Optional Width of 8.5” and 10.5”
Smart Tamp
Custom Product Fixtures
Custom Mount Configuration
8.5” wide label,10.5″ wide label, custom product fixtures, precision X-Y adjustment table, smart tamp (auto retract) tapered roller upgrade, two-hand anti tied-down input, custom configurations, print and apply when looped with thermal or color ink-jet printer.