Automatic Print & Apply

LM3612

Print & Apply

A high-performance print and apply label system designed for seamless integration into high-end production processes with faster speeds and extensive I/O points can significantly enhance automation capabilities.

Labeling Speed/Rate: Up to 16” per second and, depending on label and product size, approximately 10 to 90 per minute
Print Method: Thermal transfer and direct thermal
Interface: Centronics parallel, RS-232c Serial, Ethernet, Wireless, USB
Bar Codes: UPC-A, UPC-E, EAN-8, EAN-13, CODE 3912/5, CODE 128, CODABAR, MSI, 2/5, CODE 93, UPC Bookland, Matrix 2/5, POSTNET, UCC/EAN 128, PDF-417, Maxicode, Data Matrix
Bar Code Ratios: 1:2, 1:3, 5:2
Interface Sensors: Product sensor-photo eye/limit switch/PLC input Auxiliary output with connector standard
Electrical: 115 VAC/60Hz – 250 W idle, 600 running
Human Readable Fonts: 12 proportional and mono-spaced fonts including OCR-A and OCR-B representations and an outline font. American and European characters, uppercase and lower case with descenders (code table 850)
Air Requirements: 80 psi/3 cfm when equipped with tamp, flag, blow, swing, or corner wrap
Environment: Operating 50-95° F (10-35° C) 15-85% RH, non-condensing
Label Size: Minimum 1” wide x 1/2” long
General Size: 25”W x 22”D x 21”H
Weight: 61 lbs. with u-arm
Label Roll Capacity: 12” maximum outside diameter wound on a 3” I.D. core. Die-cut waste removed with minimum of 1/8” separations between labels in running direction

Video Reference

LM3510 (now LM3612) Pallet Label Applicator w/ Smart Tamp
LM3612 Custom Roller Tamp Print & Apply System Labeling Conveyed Poly Bags
LM6000ARS AutoRound System w/ LM3612 Print & Apply Label Applicator for Pre-Roll Tubes
Don't see what you're looking for?
Contact Us to Inquire about our Custom Options
Let's Talk about your Labeling Needs