LM-1012 – Table-Top Semi-Automatic Label Applicator

 

LM1012 Round Product Label Applicator

LM1012 Flag Module Label Applicator

LM1005 Tamp X-Y Table

LM1005 Tamp Module Label Applicator

LM1005TTPAS Table-Top Print & Apply System

The LabelMill 1012TTS label applicator is a semi-automatic table top label applicator that is the ideal system for hand pack stations or short production runs. The LM1012TTS features fast, easy changeover to meet a variety of labeling needs without sacrificing accuracy.

USE CASES

The LabelMill® 1012 label applicator is a semi-automatic table top label applicator which features fast, easy changeover to meet a variety of labeling needs.

Using the unique rail-mounted modules, the LabelMill 1012TTS can serve as a:

  • Label dispenser
  • Tamp applicator
  • Round-product applicator
    • Round Module to provide partial or full wrap on cylindrical products.
    • Adjustable size from .25” to 3” in diameter
    • Optional 6” diameter gallon jug kit
  • Flag applicator (cable, rod, hand tools, etc.)
    • FM-Module Standard Flag Label
    • CSF-Module Clamshell Flag Label
    • FMW-Module Flag Module with Wipers
  • Auto-Round Module
Because this unit can do them all, there is no need for additional units for each type of application. Changeover from one application to another in five minutes or less. The LM-1012TTS is built for heavy-duty industrial use. Hand-held labeler interface makes changeover and control adjustments quick and easy.

PRODUCT SPECS

Labeling Speed/Rate: Up to 45 per Minute
Label Placement: Label placement up to +⁄- 1⁄32” when labels are produced to specifications and product handling is controlled
Electrical: 90-240 VAC/60Hz - 2 amps
Label Roll Capacity: 12” maximum outside diameter wound on a 3” I.D. core. Die-cut waste removed with minimum of 1⁄8” separations between labels in running direction
Air Requirements: 80 psi/3cfm when equipped with tamp, flag, or round module
Label Size Minimum: 1⁄2” wide x 1⁄2” long Maximum 6.5” wide x 14” long (optional sizes available)
Application Method: Tamp, flag, round-product
Environment Operating: 50-95° F (10-35° C) 15-85% RH, non-condensing
General Size: 12”W x 18”D x 17”H
Weight: 45 lbs. plus weight of modules (5-7 lbs. each)
Options:8.5” wide label,10.5" wide label, custom product fixtures, precision X-Y adjustment table, smart tamp (auto retract) tapered roller upgrade, two-hand anti tied-down input, custom configurations, print and apply when looped with thermal or color ink-jet printer.

INCLUDED FEATURES

  • Modular Design
  • Label Dispenser
  • Tamp Applicator
  • Flag Applicator
  • Round Product Applicator
  • Auto-Round Module
  • User-Friendly Operating Software
  • Batch Counter
  • Hand Held User Interface

OPTIONAL FEATURES

  • System Status Light Tower
  • Loose Loop Interface to Thermal Printer or Color Ink-Jet
  • Optional Width of 8.5” and 10.5”
  • Smart Tamp
  • Custom Product Fixtures
  • Custom Mount Configurations
LabelMill offers a variety of labeling solutions, including: Flag Label applicator, Print and Apply Label Machine, Label Application Machine, Sticker applicator machine, labeling system, epson print and apply, label applicator, semi automatic label applicator, flag label applicator, automatic label applicator machine, automatic box labeling machine pallet label applicator, label printer applicators, print and apply labeler, automatic sticker labeling machine, bottle labeling equipment, industrial labeling machine, pressure sensitive label applicator, product labeling machine, labeling equipment manufacturers, labeling solutions, label applicator, labeler, label solution, print and apply, print & apply, box labeler, box label applicator, label system, LabelMill, Label Mill, product label, product labeling, automatic labeling, primary labeling, primary label, fully automatic label, semi automatic label, custom label applicator, custom label, table-top label, table top labeling, bottle labeling, color print and apply, tube labeling, easy label applicator