Automatic Print & Apply

Labeling Speed/Rate: Up to 16” per second and, depending on label and product size, approximately 10 to 90 per minute
Bar Codes: UPC-A , UPC-E, EAN-8, EAN-13, CODE39, INT. 2 OF 5, CODE 128, CODABAR, MSI 2 OF 5, UPC Bookland
Bar Code Ratios: 1:2, 1:2.5, 1:3 or individually programmable bar code widths.
Human Readable Fonts: Eight fonts including OCR-A and OCR-B representation and an outline font. American and European fonts, upper case and lower case with descenders plus memory available for custom fonts.
Label Roll Capacity: 12” maximum outside diameter wound on a 3” I.D. core. Die-cut waste removed with minimum for 1⁄8” separations between labels in running direction.
Label Size: Minimum 1.0” wide x 1/2” long Maximum 6” wide x 14” long (available when utilizing a Zebra print engine)
Maximum Print Area: 5” wide x 18” long, 6.5” wide x 18” long with optional engine
Print Method: Thermal transfer and direct thermal
Drive System: Servo motor drive
Application Methods: Tamp, wipe-on, blow-on, customs
Interface: Centronics parallel, Ethernet, Wireless, RS-232c Serial
Electrical: 115 VAC/60Hz – 250 W idle, 600 running
Air Requirements: 80 psi/3 cfm when equipped with tamp, flag, blow, swing, or corner wrap
Environment: Operating 50-95º F (10-35º C), 15-85% RH, non-condensing
General Size: 28” W x 25” D x 28” H
Weight: 75 lbs with U-Arm