LM-1510 Automatic Label Applicator

The Label Mill 1510 is a high-speed applicator that comes standard with features normally found on high end custom systems.
Features such as 2 dozen I/O points for easy integration into your application.


  • Easy integration to scales
  • Bar-code scanners
  • Product diverters
  • Automatic machines
  • Conveyor lines
  • Remote trigger
  • Tamp synchronization
  • Indicator signals
    • Low label
    • Broken web
    • Batch done
    • And more


Labeling Speed/Rate: Speeds up to 2400 Inches a Minute
Interface Sensors: Product sensor - photo eye/limit switch/PLC input Auxiliary outputs with connector standard
Label Placement:Label placement up to +⁄- 1⁄32” when labels are produced to specifications and product handling is controlled
Electrical:115 VAC/60Hz - 10 amps
Label Roll Capacity:12” maximum outside diameter wound on a 3” I.D. core. Die-cut waste removed with minimum of 1⁄8” separations between labels in running direction
Air Requirements:80 psi/3 cfm when equipped with tamp, flag, blow, swing, or corner wrap
Label Size:Minimum 1⁄2” wide x 1⁄2” long Maximum 61⁄2” wide x 12” long (optional sizes available)
Application Method:Tamp, wipe-on, flag, blow, corner-wrap, and swing tamp
Environment:Operating 50-95° F (10-35° C) 15-85% RH, non-condensing


  • Speeds up to 2400 Inches a Minute
  • Close Loop Servo Drive System
  • 12 & 16 Inch Label Storage Spool Standard
  • Heavy Duty Industrial Design
  • Swing Away Tamp Assemble
  • User-Friendly Operating Software
  • Automatic Set-Up
  • Batch Counter
  • Job Storage
  • Missing Label Detect
  • Left and Right-Hand Designs
  • 15 Auxiliary I/O Points (Factory Programmable)
  • Hand Held User Interface


  • Touch Screen User Interface
  • Serial Interface Ports (Two / Factory Programmable)
  • Encoder Port / Conveyor Interface
  • Dual Trigger Inputs
  • Power Unwind Label Storage Spool
  • Optional Width of 6.5” and 8.5”
  • Ethernet Interface (Factory Programmable
  • Tandem Labelers / Zero Down time
  • System Status Light Tower
  • Smart Tamp
  • Loose Loop Interface to Thermal Printer